GRADE哪里能压lpl战队,从哪里卖lpl输赢,lplS10比赛赌博

Grade 430 (UNS S43000, EN 1.4016) is the most widely used family of Ferritic alloys. It’s also one of widely used “non-hardenable” stainless with good physical and mechanical characteristics, about three-quarters the ductility of low carbon strip and inferior to chrome-nickel grades; cost less than chromium-nickel stainless steels. It is known for its good corrosion resistance to numerous substance, excellent stress, and formability, coupled with practical mechanical properties.

It is a magnetic stainless steel in the annealed condition. It can be formed using a large variety of roll forming or mild stretch-bending operations, as well as the more common drawing and bending processes.

The steel has limited weldability and should not be used in the as welded condition for dynamic or impact loaded structures. It has excellent resistance to citric and nitric acid, sulfur gases; slightly less corrosion and heat resistant than grade 301, 302, and 304, can be used in certain chemical applications.


PROPERTIES哪里能压lpl战队,从哪里卖lpl输赢,lplS10比赛赌博

  • Good corrosion and oxidation resistance
  • Can be readily fabricated by cold working
  • Excellent formability
  • Low costs
  • Magnetic
  • Thermal conductivity and finish quality

CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES FOR 430哪里能压lpl战队,从哪里卖lpl输赢,lplS10比赛赌博

ItemC%Si%Mn%P%S%Ni%Cr%N%Others
Min --- --- --- --- --- --- 16.00 --- ---
Max 0.12 0.75 1.00 0.040 0.030 0.60 18.00 --- ---
ItemTensile TestHardness TestBend Test
0.2%Y.S.1%Y.S.T.S.EL (%)HRBHV180°
Min 205 --- 420 22 --- ---  
Max N/mm2 --- N/mm2 --- 88 200 1.0t

APPLICATION哪里能压lpl战队,从哪里卖lpl输赢,lplS10比赛赌博

  • Linings for dish washers
  • Refrigerator cabinet panels
  • Automotive trim
  • Lashing wire
  • Element Supports
  • Stove trim rings
  • Fasteners
  • Chimney liners
  • Repetition machined components

SPECIFICATIONS哪里能压lpl战队,从哪里卖lpl输赢,lplS10比赛赌博

  • JIS G4305 – Cold-rolled Stainless Steel Plate, Sheet and Strip
  • EN 10088-2 (1.4016) – Stainless Steel Technical delivery conditions for sheet, plate and strip of corrosion resisting steels for general purposes

PRODUCT FORMS哪里能压lpl战队,从哪里卖lpl输赢,lplS10比赛赌博

  • Coil
  • Sheet
  • Strip

RAW MATERIAL FINISHS & AVAILABLE SIZES哪里能压lpl战队,从哪里卖lpl输赢,lplS10比赛赌博

2D A uniform, dull silver gray finish, which results from cold rolling followed by annealing and descaling.
Range 914 (3') 1000 1219 (4') 1250 1500 1524 (5')
0.3mm ~ 3.0mm
30GA ~ 11GA
0.012" ~ 0.1196"
2B
(Mill Finish)
A bright, cold-rolled finish resulting in the same manner as 2D finish, except that the annealed and descaled sheet received a final light roll pass through polished rolls. This is the general-purpose cold-rolled finish that can be used, or a preliminary step to polishing.
Range 914 (3') 1000 1219 (4') 1250 1500 1524 (5')
0.3mm ~ 3.0mm
30GA ~ 11GA
0.012" ~ 0.1196"
BA
(Bright Anneal)
A highly reflective, mirror like finish, which was produced by bright annealing under Oxygen-free atmospheric conditions following cold rolling using polished rolls.
Range 914 (3') 1000 1219 (4') 1250 1500 1524 (5')
0.3mm ~ 2.0mm    
30GA ~ 14GA    
0.012" ~ 0.0747"